Ballasting and Tamping Transforms Mainline

Ballasting and tamping of the Northwestern Pacific mainline from Lombard compass west to Ignacio by Balfour Beatty forces continues in earnest. In the above view made on August 13, the tamper and ballast regulator work near Schellville (David Baldwin photo).


With vegetation and debris removed and new ties and fresh crushed rock ballast installed, the transformation of the NWP mainline near Schellville is nearly complete (David Baldwin photo).

Tie Work Complete, Ballasting Commences

With the distribution and insertion of 53,000 new ties on the 62 miles of Northwestern Pacific mainline between Lombard and Windsor complete, Balfour Beatty forces turned their attention to ballasting last week. During the next two to three weeks, approximately 22,000 tons of rock from the Syar Industries quarry in Napa will be dumped and the mainline will be tamped between Lombard and Ignacio.

In the above view taken at Schellville on July 29, nine former Helm Leasing ballast cars owned by Shamrock have been restenciled for the NWP and will be used by Balfour Beatty throughout the reconstruction. Two additional ballast cars remain in bad order status in the yard at Petaluma (Nate Muhlethaler photo).


Balfour Beatty crews dump rock in front of the Schellville depot on July 29, the first day of ballasting (Nate Muhlethaler photo).


After dumping two loads of rock at Brazos on July 31, the Balfour Beatty work train - pictured near Ramal - returned to Schellville for reloading. Rock is trucked from Napa to Schellville and a front-end loader is used to fill the cars at the latter point (Nate Muhlethaler photo).

Special thanks to Jamie Miller, Nate Muhlethaler, and Keith Powley.